 |
 |
Product Lineup |
  Click the icon as follows, to check the details. |
| Rod Type |
Bore Size mm |
| 40 |
50 |
63 |
80 |
100 |
| B |
|
|
|
|
|
| C |
|
|
|
|
|
|
|
Specifications |
| Action Style |
Double-acting Single-rod/with Switch |
| Available Bores(mm) |
 40·50·63·80·100 |
| Mounting Style |
LA·LB·FG·FH·CT |
| Rod Type |
B |
C |
| Nominal Pressure |
7MPa |
Max. Allowable
Pressure |
Rod Side |
13MPa |
11MPa |
| Head Side |
9MPa |
| Proof Test Pressure |
10.5MPa |
Min. Working
Pressure |
Rod Side |
0.45MPa and below |
0.4MPa and below |
| Head Side |
0.3MPa and below |
| Operating Speed Range |
8∼300mm/s |
| Temperature Range |
-10∼+50ºC(But do not use wnen frozen) |
| Structure of Cushioning |
Metal fitting type |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
| Tolerance of Thread |
JIS 6g/6H |
| Standard Stroke |
40·50:∼1200mm 63·80:∼1600mm 100:∼2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachments |
Rod End Eye(T-End)·Rod End Clevis(T-End) |
| Rod Boot |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/Conex |
| Others |
Lock Nut |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. |
| · |
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Specifications of Detector |
| Action Style |
Standard |
Semi-standard |
| Power Supply |
DC12V(80mA and above) |
DC12V(80mA and above) |
DC24V(100mA and above) |
| Output Method |
DC12V
AB phase output (90º phase) |
NPN open collector 30mA
AB phase output (90º phase) |
NPN open collector 30mA
AB phase output (90º phase) |
| Resolution Ability |
0.1mm/Pulse |
| Max. Response Speed |
300mm/s |
| Temperature Range |
-10ºC∼+50ºC(But do not use wnen frozen) |
| Note)Length Measuring Tolerance |
0.5mm/m |
| Humidity |
90%RH(No condensation) |
| Output circuit diagram |
 |
 |
 |
| Wiring Method |
 |
| Output mode |
 |
| Note) |
This is the tolerance of total migration length per meter. |
|
Compatibility of Working Fluid and Packing Material |
| Packing Material |
Working Fluid |
Petroleum-based
Fluid |
Water-Glycol
Fluid |
Phosphate-Ester
Fluid |
Water in Oil
Fluid |
Oil in Water
Fluid |
| 1:Nitrile rubber |
 |
|
 |
|
|
| 2:Urethane rubber |
 |
|
|
 |
|
| 3:Fluoric rubber |
|
|
|
|
|
| 6:HNBR |
|
|
|
|
|
| Note1) |
The -marked items are applicable,while the -marked items are inapplicabe. |
Note2)
|
The -marked items are the recommended packing materials in case of giving the first priority to abrasion resistance. |
|
|
|
|
