 |
 |
Product Lineup |
  Click the icon as follows, to check the details. |
| Rod Diameter |
Bore size (mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
140 |
150 |
160 |
180 |
200 |
224 |
250 |
| B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C |
- |
|
|
|
|
|
|
|
|
|
|
|
|
|
| A |
- |
|
|
|
|
|
|
|
|
|
- |
- |
- |
- |
|
|
Specifications |
| Action Style |
Double-acting Single-rod/Basic |
| Available Bores(mm) |
 32,40,50,63,80,100,125,
140,150,160,180,200,224,250 |
| Mounting Style |
SD/LA/LB/LC/FA/FB/FY/FE/FZ/FC/FD/FK/CA/CS/CB/TA/TC |
| Rod Dia. Type |
B rod |
C rod |
A rod |
| Norminal Pressure |
7MPa |
| Max. Working Pressure |
Rod Side |
13.5MPa |
11MPa |
15MPa |
| Head Side |
9MPa |
| Proof Test Pressure |
10.5MPa |
| Min. Working Pressure |
Rod Side |
0.45MPa or above |
0.4MPa or above |
0.6MPa or above |
| Head Side |
0.3MPa |
| Operating Speed Range |
32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s 140 to 250:8 to 200mm/s |
| Operating Temperature |
-10 to +80 ºC(But do not use when frozen) |
| Cushion Mechanism |
Metal fitting type |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32 to 50: to 1200mm 63/80: to 1600mm 100 to 250: to 2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Spherical Eye(S type)/Rod End Clevis(Y type)/F Joint |
| Boots |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/Conex |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
Petroleum-based
Fluid |
Water-Glycol
Fluid |
Phosphate-Ester
Fluid |
Water in Oil
Fluid |
Oil in Water
Fluid |
| 1:Nitrile rubber |
 |
|
 |
|
|
| 2:Urethane rubber |
 |
|
|
 |
|
| 3:Fluoric rubber |
|
|
|
|
|
| 6:HNBR |
|
|
|
|
|
Note1)
|
The -marked items are applicable,while the -marked items are inapplicabe. In the case of -marked, please contact to TAIYO service network. |
Note2)
|
The -marked items are the recommended packing materials in case of giving the first priority to abrasion resistance. |
|
|
|
|
