 |
 |
Product Lineup |
  Click the icon as follows, to check the details.
Rod BoreRod BoreRod Bore |
| Rod Bore |
Bore Size(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
140 |
150 |
160 |
180 |
200 |
224 |
250 |
| B |
|
|
|
|
|
|
|
- |
- |
- |
- |
- |
- |
- |
| C |
- |
|
|
|
|
|
|
- |
- |
- |
- |
- |
- |
- |
|
|
Specifications |
| Action Style |
Cutting oil proof type/Double-acting Single-rod/Switch Set |
| Available Bores(mm) |
 32,40,50,63,80,100,125 |
| Mounting Style |
SD/LA/LB/LC/FA/FB/FY/FZ/FC/FD/FK/CA/CS/CB/TA/TC |
| Rod Dia. type |
B |
C |
| Norminal Pressure |
7MPa |
| Max. Allowable Pressure |
Rod Side |
13.5MPa |
11MPa |
| Head Side |
9MPa |
| Proof Test Pressure |
10.5MPa |
| Min. Working Pressure |
Rod Side |
more than 0.45MPa |
more than 0.4MPa |
| Head Side |
0.3MPa |
| Operating Speed Range |
32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do not use when frozen) |
| Cushion Mechanism |
Metal fitting type |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32 to 50: to 1200mm 63/80: to 1600mm 100/125:to 2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Spherical Eye(S type)/Rod End Clevis(Y type)/F Joint |
| Boots |
Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex |
| Others |
Lock nut |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load
shall be set at less than the maximum allowable pressure. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Switch Mountable Minimum Stroke |
Bore
(mm) |
Types other than TC type |
TC type |
| With a switch |
With two switches |
With a switch |
With two switches |
AX
AX205W |
WR形 |
WS |
AX
AX205W |
WR |
WS |
AX
AX205W |
WR |
WS |
AX
AX205W |
WR |
WS |
| 32 |
20 |
45(35) |
45(35) |
25 |
45(35) |
45(35) |
50 |
70(60) |
75(65) |
110 |
155(135) |
165(145) |
| 40 |
115 |
| 50 |
40(30) |
45(35) |
40(30) |
45(35) |
| 63 |
40(30) |
40(30) |
85(75) |
85(75) |
125 |
170(150) |
175(155) |
| 80 |
130 |
| 100 |
35(25) |
40(30) |
35(25) |
40(30) |
65 |
95(85) |
135 |
175(150) |
190(170) |
| 125 |
40(25) |
40(25) |
70 |
90(80) |
150 |
185(160) |
195(170) |
| 140 |
- |
- |
- |
- |
95 |
- |
- |
175 |
- |
- |
Note)
|
For the TC type (with a switch), the cylinder strokes in case that the TC type
attachment shown in the below figures are positioned in the place other than the
center are shown in the table above. |
|
For the minimum PH dimension at the switch mounting, refer to the dimensional
drawings of theTC type. |
|
The dimensions in the ( ) markes of the WR and WS types are the minimum strokes
at the mounting of the WR515, WS225-1. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
|
Aqueous Cutting Oil |
| Petroleum-based Fluid |
Water-Glycol Fluid |
| 6:HNBR |
 |
 |
|
|
|
|
|
|
