 |
 |
Product Lineup |
  Click the icon as follows, to check the details.
|
| Rod Diameter |
Bore(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
140 |
150 |
160 |
180 |
200 |
224 |
250 |
| B |
|
|
|
|
|
|
|
- |
- |
- |
- |
- |
- |
- |
| C |
- |
|
|
|
|
|
|
- |
- |
- |
- |
- |
- |
- |
|
|
Specifications |
| Action Style |
Cutting oil proof type/Double-acting Single-rod/Basic |
| Available Bores(mm) |
 32,40,50,63,80,100,125 |
| Mounting Type |
SD/LA/LB/LC/FA/FB/FY/FZ/FC/FD/FK/CA/CS/CB/TA/TC |
| Rod Dia. Type |
B |
C |
| Norminal Pressure |
7MPa |
| Max. Working Pressure |
Rod Side |
13.5MPa |
11MPa |
| Head Side |
9MPa |
| Proof Test Pressure |
10.5MPa |
| Min. Working Pressure |
Rod Side |
more than 0.45MPa |
more than 0.4MPa |
| Head Side |
0.3MPa |
| Operating Speed Range |
32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do not use when frozen) |
| Cushion Mechanism |
Metal fitting type |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32 to 50: to 1200mm 63/80: to 1600mm 100/125: to 2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Spherical Eye(S type)/Rod End Clevis(Y type)/F Joint |
| Boots |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/Conex |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load
shall be set at less than the maximum allowable pressure. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
Aqueous Cutting Oil |
| Petroleum-based Fluid |
Water-Glycol Fluid |
| 6:HNBR |
 |
 |
|
|
|
|
|
