3.5MPa Hydraulic Cylinder with Positioning Sensor/Standard 35P-3 series
Sectional Drawing
Description of Term
Product Lineup
Bore Size mm
32 40 50 63 80 100
35P-31LA32B100 35P-31LA40B100 35P-31LA50B100 35P-31LA63B100 35P-31LA80B100 35P-31LA100B100

Action Style Double-acting Single-rod/Standard
Available Bores(mm) φ32·φ40·φ50·φ63·φ80·φ100
Mounting Style LA·LB·FC·FH·CT
Piston Packing Type "U" packing Slipper Seal
Nominal Pressure 3.5MPa
Max. AllowablePressure 4.5MPa
Proof Test Pressure 5MPa
Min. WorkingPressure 0.2MPa and above
Operating Speed Range 8∼300mm/s 0.1∼300mm/s
Temperature Range -10∼+50ºC (But do not use wnen frozen)
Structure of Cushioning Metal fitting type
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g/6H
Standard Stroke φ32·φ40:∼1000mm φ50·φ63:∼1200mm
Stroke Tolerance

Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
· Conex of boots is the registered trade mark of Teijin,Ltd.
· Slipper seal is the registered trade mark of Japan Bulker Industry Co.

Specifications of Detector
Type Standard Semi-standard
Power Supply DC12V DC12V∼24V
Output Method DC12V voltage output
A,B phase(90º phase)
30mA and below
NPN open collector output
A,B phase(90º phase)
Applied voltage DC24V and below
Sink current 30mA and below
Resolution Ability 0.1mm/Pulse
Max. Response Speed 300mm/s
Temperature Range -10∼+60ºC (But do not use wnen frozen)
Note)Length Measuring Tolerance 0.5mm/m
Humidity 90%RH(No condensation)
Note) This is the tolerance of total migration length per meter.

Compatibility of Working Fluid and Packing Material
Packing Material Working Fluid
Water in Oil
Oil in Water
1:Nitrile rubber
Note1) The -marked items are applicable,while the -marked items are inapplicabe.

Copyright(c)2004 TAIYO,LTD. All rights reserved.