 |
 |
Product Lineup |
 Click the icon as follows, to check the details.
|
| Rod Diameter |
Bore(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
140 |
160 |
| B rod |
|
|
|
|
|
- |
- |
- |
- |
|
|
Specifications |
| Action Style |
Cutting Oil Proof Type/Double-acting Single-rod/Switch Set |
| Available Bores(mm) |
 32,40,50,63,80 |
| Mounting Style |
SD/LA/EA/EB/FA/FE(for A rod)/FB/CA/CB/TA/TC |
| Rod Type |
B rod |
| Norminal Pressure |
16MPa |
| Max. Allowable Pressure |
20MPa |
| Proof Test Pressure |
24MPa |
| Min. Operating Pressure |
Rod Side : less than 0.45MPa Head Side : less than 0.3MPa |
| Operating Speed Range |
32 to 63 : 8 to 400mm/s 80 : 8 to 300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do not use when frozen) |
| Cushion Mechanism |
Metal fitting system |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working
oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32 : to 1200mm 40/50 : to 1600mm
63 : to 1800mm 80 : to 2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Clevis(Y type) |
| Boots |
Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load
shall be set at less than the maximum allowable pressure. |
|
Mounting style of SD, FA, FE and FB is not stipulated in JIS or ISO standard. |
|
Available Bore of 140mm is not stipulated in JIS or ISO standard. |
|
Rod series B and port Rc conform to JIS B8367 (not included in ISO 10762
standards for body). |
|
Rod side of A rod is not a floating cushion. |
|
The minimum working speed range of slipper seal (number 8) is 1mm/s. |
|
G port for bore 32mm is equipped spacer. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Switch Mountable Minimum Stroke |
Bore
(mm) |
Without TC Type |
TCType |
| With a switch |
With two switches |
With a switch |
With two switches |
| AX205W |
WR
WS |
AX205W |
WR
WS |
AX205W |
WR
WS |
AX205W |
WR |
WS |
| 32 |
30 |
55(75) |
30(40) |
55(75) |
60 |
85 |
115 |
165 |
170 |
| 40 |
25 |
50(75) |
25 |
50(75) |
80 |
| 50 |
25 |
50 |
25 |
50 |
65 |
90 |
125 |
175 |
180 |
| 63 |
95 |
180 |
| 80 |
20 |
50 |
50 |
75 |
100 |
135 |
190 |
190 |
|
Allowable Fluid, Seal MaterialSe |
| Seal Material |
Allowable Fluid |
Aqueous Cutting Oil |
| Petroleum-based Fluid |
Water-Glycol Fluid |
| 6: HNBR |
 |
 |
|
| Note1) |
The -marked items are applicable, while -marked items are inapplicable. |
|
|
|
|
