14MPa Hydraulic Cylinder 140H-8 Series/ Double-acting Single-rod
Sectional Drawing
Description of Term
Product Lineup Click the icon as follows, to check the details. out
Rod Diameter Bore(mm)
32 40 50 63 80 100 125 140 150 160 180 200 224 250
B 140H-81SD32BB100-AB 140H-81SD40BB100-AB 140H-81SD50BB100-AB 140H-81SD63BB100-AB 140H-81SD80BB100-AB 140H-81SD100BB100-AB 140H-81SD125BB100-AB 140H-81SD140BB100-AB 140H-81SD150BB100-AB 140H-81SD160BB100-AB 140H-81SD180BB100-AB 140H-81SD200BB100-AB 140H-81SD224BB100-AB 140H-81SD250BB100-AB
C - 140H-81SD40CB100-AB 140H-81SD50CB100-AB 140H-81SD63CB100-AB 140H-81SD80CB100-AB 140H-81SD100CB100-AB 140H-81SD125CB100-AB 140H-81SD140CB100-AB 140H-81SD150CB100-AB 140H-81SD160CB100-AB 140H-81SD180CB100-AB 140H-81SD200CB100-AB 140H-81SD224CB100-AB 140H-81SD250CB100-AB
A - 140H-81SD40AB100-AB 140H-81SD50AB100-AB 140H-81SD63AB100-AB 140H-81SD80AB100-AB 140H-81SD100AB100-AB 140H-81SD125AB100-AB 140H-81SD140AB100-AB 140H-81SD150AB100-AB 140H-81SD160AB100-AB - - - -

Specification
Action Style Double-Acting Single-rod/Standardl type
Available Bores(mm) 32/40/50/63/80/100/125/
140/150/160/180/200/224/250
Mounting Style SD/LA/LC/FY/FE/FZ/FC/FD/FK/CA/CS/CB/TA/TC
Rod Dia. Type B C A
Nominal Pressure 14MPa
Max. Allowable Pressure Rod Side 18MPa 14MPa 18MPa
Head Side 18MPa
Proof Test Pressure 21MPa
Min. Working Pressure Rod Side 0.45MPa 0.4MPa 0.6MPa
Head Side 0.3MPa
Operating Speed Range 32 to63:8 to 400mm/s 80 to 125:8 to 300mm/s 140 to 250:8 to 200mm/s
Temperature Range -10 to +8 ºC (But do not use wnen frozen)
Structure of Cushioning Metal fitting type
Adaptable Working Oil Petroleum-based fluid
(In case of the use of other fluids, refer to the table for adaptation of fluids.)
Tolerance of Thread JIS 6g/6H
Standard Stroke 32 to 50: to 1200mm 63/80: to 1600mm 100 to 250: to 2000mm
Stroke Tolerance
Accessories Rod End Attachments 1Rod end eye(Ttype)/1Rod end spherical eye(Stype)/
2Rod end clevis with pin(Ttype)/F joint(Ftype)
Rod Boot Standard:Nylon tarpaulin Semi-standard:Chloroprene Conex
Others Lock nut
Note) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Conex of boots is the registered trade mark of Teijin,Ltd.

Alloawable Fluid, Seal Material
Seal Material Aloowable Fluid
Petroleum-based Fluid Water-Glycol Fluid Phoshate-Ester Fluid Water in Oil Fluid Oil in Water Fluid
1: Nitile Rubber
2: Urethane Rubber
3: Fluoric Rubber
6: HNBR
Note1) The and -marked items are applicable, while the -marked items are inapplicable.
Note2) The -marked items are the recommended packing materials in case of giving the first priority to abrasion resistance.

Copyright(c)2004 TAIYO,LTD. All rights reserved.