14MPa Hydraulic Cylinder 140HW-8 Series(Cutting oil proof)/ Double-acting Single-rod Sectional Drawing Description of Term

Product Lineup Click the icon as follows, to check the details. Rod Diameter Bore(mm) 32 40 50 63 80 100 125 140 150 160 180 200 224 250 B - - - - - - - C - - - - - - - - Specifications Action Style Cutting Fluid Proof Type/Double-acting Single-rod/Standard Type Available Bores(mm) 32/40/50/63/80/100/125 Mounting Style SD/LA/LB/LC/FA/FB/FY/FZ/FC/FD/FK/CA/CS/CB/TA/TC Rod Dia. Type B C Norminal Pressure 14MPa Max. Allowable Pressure Rod Side 18MPa 14MPa Head Side 18MPa Proof Test Pressure 21MPa Min. Operating Pressure Rod Side 0.45MPa 0.4MPa Head Side 0.3MPa Operating Speed Range 32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s Operating Temperature -10 to +80 ºC(But, do not use when frozen) Structure of Cushining Metal Cuchion Working Fluid Petroleum-based fluid (In case of the use of other fluids, refer tot the table for adaptaiton of fluids.) Thread Tolerance JIS 6g/6H Standard Stroke 32 to 50: to 1200mm 63/80: to 1600mm 100/125: to 2000mm Stroke Tolerance Accessories Rod End Eye 1Rod end eye(T Type)/1Rod End Spherical Eye(S Type)/ 2Rod End Clevis(T Type)/F Joint(F Type) Boots Standard:Nylon tarpaulin Semi-standard:Chloroprene/Conex Note) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. Conex of boots is registered trade mark of Teijin,Ltd. Allowable Fluid, Seal Material Seal Material Allowable Fluid Aqueous Cutting Oil Petroleum-based Fluid Water-Glycol Fluid 6: Nitrile Rubber

Copyright(c)2004 TAIYO,LTD. All rights reserved.