Round Body Design Pneumatic Cylinder 10Z-3G Series

Round Body Design Pneumatic Cylinder 10Z-3G Series/ Double-acting/ Non-rotating

Product Lineup

Click the icon as follows, to check the details.

Specifications

Action Style		Non-rotating type/Double-acting Single-rod/Standard Type with Switch
Aailable Bores(mm)		25.40,50,63
Mounting Style	Standard Type	LB
	Clevis Cut Type	SK,LK,FK,TK,TK,BP with B,
	Note3)Axial Port Type	SP,LP,FP,TP,TP with B,AP,BP
Fluid Used		Air
Lubrication		Not necessary(But possible)
Operating Pressure Range		25,40:0.1 to 1MPa 50,63:0.05 to 1MPa
Proof Test Pressure		1.5MPa
Note1)Operating Speed Range		50 to 700mm/s
Operating Temperature		-10 to +70 ºC(But do not use when frozen)
Cushion Mechanism		Standard: With Cushion Pad(25,40) With Cushion on Both Ends(50,63) Semi-standard: With Cushion(only for 40)
Rotating Angle Tolerance		25:1.5 Degrees 40:1 Degree 50,63:0.8 Degrees
Allowable Torque		25: less than 0.49N,m 40: less than 0.96N,m 50,63: less than 3.4N,m
Thread Tolerance		JIS 6g/6H
Stroke Tolerance
Accessories	Rod End Attachment	Rod End Spherical Eye(S type)/Rod End Eye(T type)/Rod End Clevis(Y type)(Y Type is only for50,63)
	Dust Cover	Nylon tarpaulin

Note1)	When setting a switch in the intermediate position, set the cylinder speed to 300mm/s max. in consideration of the response speed of load relay and others.
Note2)	Rotating angle tolerance means the clearance at stroke end in the piston rod rotating direction.
Note3)	When using in combination with other guide, use a round rod.
Note4)	Consult with us separately in case that the port position and cushion valve position are modified.

Stroke Fabrication Range

Note1)

Consult with us separately in case that stroke other than above standard stroke (marked with

)is desired.