 |
 |
Product Lineup |
  Click the icon as follows, to check the details. |
|
| Bore Size(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
| - |
|
|
|
|
|
- |
|
|
|
Specifications |
| Action Style |
Non-rotating Type/Double-acting Double-rod/With Valve and Switch |
| Available Bores(mm) |
 40, 50, 63, 80, 100 |
| Mounting Style |
SD, LA, LB, FA, TC |
| Working Fluid |
Air |
| Lubrication |
Not necessary (But possible) |
| Operating Pressure Range |
0.17 to 0.7MPa |
| Proof Test Pressure |
1.05MPa |
| Operating Speed Range |
50 to 500mm/s |
| Operating Temperature |
+5 to +50 ºC(But do not use when frozen) |
| Cushion Mechanism |
With cushion on both ends (with lock mechanism) |
| Cushion Stroke |
40:16mm 50/63:20mm 80/100:25mm |
| Note3)Rotating Angle Tolerance |
40: 1 Degrees 50/63:0.8 Degrees 80/100:0.5 Degrees |
| Allowable Torque |
40:1N/m 50/63:3.4N/m 80/100:10N/m |
| Thread Tolerance |
JIS 6g/6H |
| Stroke Fabrication Range |
to 500 |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
1Rod End Eye(T type)/2Rod End Clevis(T type) |
| Bracket |
TC Bracket |
| Note2)Dust Cover |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/CONEX |
| Note1) |
When setting a switch in the intermediate position, set the cylinder speed
to 300mm/s max. in consideration of the response speed of load relay and
others. |
| Note2) |
CONEX: Registered trade mark of TEIJIN LIMITED |
| Note3) |
Rotating angle tolerance means the clearance at stroke end in the piston
rod rotating direction. |
| Note4) |
When using in combination with other guide, use a round rod. |
|
|
|
|
