 |
 |
Product Lineup |
  Click the icon as follows, to check the details. |
|
| Bore Size(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
| - |
|
|
|
|
|
- |
|
|
|
Specifications |
| Action Style |
Non-rotating Type/Retractable Stroke Adjustment/Standard Type with switch |
| Available Bores(mm) |
 40, 50, 63, 80, 100 |
| Mounting Style |
SD, FA, TC |
| Stroke Adjustment Method |
Adjustment Bolt |
| Stroke Adjustment Range |
0 to 60mm |
| Working Fluid |
Air |
| Lubrication |
Not necessary(But possible) |
| Operating Pressure Range |
0.1 to 1MPa |
| Proof Test Pressure |
1.5MPa |
| Operating Speed Range |
50 to 700mm/s |
| Operating Temperature |
-10 to +70ºC(But do not use when frozen) |
| Cushion Mechanism |
With cushion on both ends (No cushion when retracting stroke is adjusted.) |
| Cushion Stroke |
40:16mm 50,63:20mm 80/100:25mm |
| Thread Tolerance |
JIS 6H/6g |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Spherical Eye(S type)/Rod End Clevis(Y type) /F Joint |
| Bracket |
TC Bracket |
| Dust Cover |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/CONEX |
| Note1) |
When setting a switch in the intermediate position, set the cylinder speed to
300mm/s max. in consideration of the response speed of load relay and others. |
| Note2) |
CONEX: Registered trade mark of TEIJIN LIMITED |
| Note3) |
Rotating angle tolerance means the clearance at stroke end in the piston rod
rotating direction. |
| Note4) |
When using in combination with other guide, use a round rod. |
|
|
|
|
