Pneumatic Cylinder 10A-6G Series/ Double-acting Non-rotating (Standard Type)
Switch Code
Product Lineup
Bore Size(mm)
32 40 50 63 80 100 125
- -

Specifications
Action Style Non-rotating Type/Double-acting Single-rod/Standard Type with Switch
Available Bores(mm) φ40, φ50, φ63, φ80, φ100
Mounting Style SD, LA, LB, FA, FB, CA, CC, CB, TC
Working Fluid Air
Lubrication Not necessary (But possible)
Operating Pressure Range 0.1 to 1MPa
Proof Test Pressure 1.5MPa
Operating Speed Range 50 to 500mm/s
Operating Temperature -10 to +70 ºC(But do not use when frozen)
Cushion Mechanism With cushion on both ends (with lock mechanism)
Cushion Stroke φ40:16mm φ50,φ63:20mm φ80/φ100:25mm
Note3)Rotating Angle Tolerance φ40: 1 Degrees φ50/φ63: 0.8 Degrees φ80/φ100: 0.5 Degrees
Allowable Torque φ40:1N/m φ50/φ63:3.4N/m φ80/φ100:10N/m
Thread Tolerance JIS 6g/6H
Stroke Fabrication Range to 5000
Stroke Tolerance
Accessories Rod End Attachment Rod End Eye(T type)/Rod End Spherical Eye(S type)
Bracket CB Bracket/TC Bracket
Note2)Dust Cover Standard:Nylon tarpaulin Semi-standard:Chloroprene/CONEX
Note1) When setting a switch in the intermediate position, set the cylinder speed to 300mm/s max. in consideration of the response speed of load relay and others.
Note2) CONEX: Registered trade mark of TEIJIN LIMITED
Note3) Rotating angle tolerance means the clearance at stroke end in the piston rod rotating direction.
Note4) When using in combination with other guide, use a round rod.
Copyright(c)2004 TAIYO,LTD. All rights reserved.