10MPa Tiny-Bore(Round Body) Hydraulic Cylinder 100Z-1R Series/ Double-acting Single-rod (Switch-Set)
Switch Code
Sectional Drawing
Description of term
Product Lineup Click the icon as follows, to check the details.
Packing Material Mounting Style Bore(mm)
20 25 32
1:Nitrile rubber SD 100Z-1R1SD20B100-AH2 100Z-1R1SD25B100-AH2 100Z-1R1SD32B100-AH2
LB 100Z-1R1LB20B100-AH2 100Z-1R1LB25B100-AH2 100Z-1R1LB32B100-AH2
FA 100Z-1R1FA20B100-AH2 100Z-1R1FA25B100-AH2 100Z-1R1FA32B100-AH2
CA 100Z-1R1CA20B100-AH2 100Z-1R1CA25B100-AH2 100Z-1R1CA32B100-AH2
8:HNBR SD 100Z-1R8SD20B100-AH2 100Z-1R8SD25B100-AH2 100Z-1R8SD32B100-AH2
LB 100Z-1R8LB20B100-AH2 100Z-1R8LB25B100-AH2 100Z-1R8LB32B100-AH2
FA 100Z-1R8FA20B100-AH2 100Z-1R8FA25B100-AH2 100Z-1R8FA32B100-AH2
CA 100Z-1R8CA20B100-AH2 100Z-1R8CA25B100-AH2 100Z-1R8CA32B100-AH2

Specifications
Action Style Double-acting Single-rod/Switch Set
Available Bores(mm) 20,25,32
Mounting Style SD/LB/FA/CA
Norminal Pressure 10MPa
Max. Allowable Pressure 12MPa
Proof Test Pressure 15MPa
Min. Operating Pressure less than 0.3MPa
Operating Speed Range 8 to 500mm/s(Not Including Cushion Parts)

(Without Cushion 8 to 100mm/a)
Operating Temperature
(Ambient Temperature and Oil Temperature)
-10 to +70 ºC(But do no use when frozen)
Cushion Mechanism Metal fitting system(Floating Cushion)
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance JIS 6g/6H
Standard Stroke 20 : to 800mm 25 : to 800mm 32 : to 850mm
Stroke Tolerance
Accessories Rod End Attachment Rod End Eye(T type)/Rod End Clevis(Y type) /F Joint (F Type)
Note)

Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.

Switch Mountable Minimum Stroke Unit : mm
Action Style With a switch With two switches
20 15 25
25
32

Allowable Fluid, Seal Material
Seal Material Allowable Fluid
Petroleum-based Fluid Water-Glycol Fluid Phosphate-Ester Fluid Water in Oil Fluid Oil in Water Fluid
1:Nitrile rubber
6: HNBR
Note1) The -marked items are applicable, while -marked items are inapplicable.
Note2)

The -marked items are the recommended packing materials in case of giving the first priority to abrasion resistance.
Note3) As for using Water-glycol fluid, W/O working fluid or O/W working fluid by Hydrogenated nitrile rubber, please set the oil temperature range at -10 to +100 degree celsius.
Note4) Temperature is shows the working temperature range of the gasket. It is different with the working temperature of the cylinder unit. Please inquire if the cylinder is used at high temperature.

Copyright(c)2004 TAIYO,LTD. All rights reserved.