 |
 |
Product Lineup |
 Click the icon as follows, to check the details.
|
| Packing Material |
Mounting Style |
Bore(mm) |
| 20 |
25 |
32 |
| 1:Nitrile rubber |
SD |
|
|
|
| LB |
|
|
|
| FA |
|
|
|
| CA |
|
|
|
| 8:HNBR |
SD |
|
|
|
| LB |
|
|
|
| FA |
|
|
|
| CA |
|
|
|
|
|
Specifications |
| Action Style |
Double-acting Single-rod/Basic |
| Available Bores(mm) |
 20,25,32 |
| Mounting Style |
SD/LB/FA/CA |
| Norminal Pressure |
10MPa |
| Max. Allowable Pressure |
12MPa |
| Proof Test Pressure |
15MPa |
| Min. Operating Pressure |
less than 0.3MPa |
| Operating Speed Range |
8 to 500mm/s(Not Including Cushion Parts)
(Without Cushion 8 to 100mm/a) |
Operating Temperature
(Ambient Temperature and Oil Temperature) |
-10 to +80 ºC(But do no use when frozen) |
| Cushion Mechanism |
Metal fitting system(Floating Cushion) |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working
oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
20 : to 800mm 25 : to 800mm 32 : to 850mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Clevis(Y type) /F Joint (F Type) |
Note)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load
shall be set at less than the maximum allowable pressure. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
| Petroleum-based Fluid |
Water-Glycol Fluid |
Phosphate-Ester Fluid |
Water in Oil Fluid |
Oil in Water Fluid |
| 1:Nitrile rubber |
 |
|
 |
|
|
| 6: HNBR |
 |
|
|
|
|
| Note1) |
The -marked items are applicable, while -marked items are inapplicable. |
Note2)
|
The -marked items are the recommended packing materials in case of giving
the first priority to abrasion resistance. |
| Note3) |
As for using Water-glycol fluid, W/O working fluid or O/W working fluid by
Hydrogenated nitrile rubber, please set the oil temperature range at -10 to
+100 degree celsius. |
| Note4) |
Temperature is shows the working temperature range of the gasket. It is
different with the working temperature of the cylinder unit. Please inquire if
the cylinder is used at high temperature. |
|
|
|
|
