 |
 |
Product Lineup |
  Click the icon as follows, then the list price and leadtime will be
work out. |
| Rod Diameter |
Bore Size(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
| B |
|
|
|
|
|
|
|
|
|
Specifications |
| Action Style |
Double-acting Single-rod/Switch Set |
| Available Bores(mm) |
 32, 40, 50, 63, 80, 100, 125 |
| Mounting Style |
SD/LA/EA/EB/FA/FB/CA/CB/TA/TC |
| Rod Dia. type |
B |
| Norminal Pressure |
10MPa |
| Max. Allowable Pressure |
Without TC : 10MPa TC : 32 to 63 10MPa 80 to 125 7MPa |
| Proof Test Pressure |
15MPa |
| Min. Working Pressure |
Rod Side : less than 0.45MPa Head Side : less than 0.3MPa |
| Operating Speed Range |
32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do no use when frozen) |
| Cushion Mechanism |
Metal fitting system |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working
oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32/40 to 1200mm 50/63: to 1400mm
80: to 1600mm 100: to 1800mm 125: to 2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Clevis(Y type) |
| Boots |
Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex |
Note)
|
The max. allowable pressures for the TC type are applicable when load is applied
to only one side with the TC positioned in the center. |
|
Hydraulic pressure that is generated in cylinder due to the inertia of load
shall be set at less than the maximum allowable pressure. |
|
Rod series B and port Rc conform to JIS B8367 (not included in ISO 10762
standards for body). |
|
As for the EA mounting style cylinder with 63mm bore, only the length of centering guide (dimension F) differs from that of
the standard type. |
|
Mounting dimensions of the CA mounting style cylinder differ from those of the
standard type. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Switch Mountable Minimum Stroke |
Bore
(mm) |
Types other than TC type |
TC type |
| AX/AX205W |
WE/WS |
AX/AX205W |
WE/WS |
| 32 |
30(40) |
55(75) |
115 |
170 |
| 40 |
30 |
55 |
115 |
170 |
| 50 |
125 |
175 |
| 63 |
130 |
180 |
| 80 |
140 |
190 |
| 100 |
25 |
50 |
150 |
200 |
| 125 |
20 |
160 |
210 |
Note)
|
Figures in the parentheses on the line of 32 mm bore indicate the minimum strokes when the rod side detector switch and the head side detector switch are mounted on the same surface. |
|
The minimum stroke is identical whether only one switch (one-side stroke end detector) or two switches (double end detector) mounted. |
|
For the TC type, the figures are applicable when the TC fitting is in the
center, and the switch can be installed to both the rod side and the head
side. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
| Petroleum-based Fluid |
Water-Glycol Fluid |
Phosphate-Ester Fluid |
Water in Oil Fluid |
Oil in Water Fluid |
| 1:Nitrile rubber |
 |
|
 |
|
|
| 3:Fluoric rubber |
 |
|
|
 |
|
| 6: HNBR |
|
|
|
|
|
| 8:Combined seal |
|
|
|
|
|
Note1)
|
The -marked items are applocable,while the -marked items are inapplicabe.
For the -marked items, contact us before usage. |
Note2)
|
The -marked items are the recommended packing materials in case of giving the
first priority to abrasion resistance. |
|
|
|
|
