|
 |
Product Lineup |
  Click the icon as follows, then the list price and leadtime will be work out. |
| Rod Diameter |
Bore Size(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
| B |
|
|
|
|
|
|
|
|
|
Specifications |
| Action Style |
Double-acting Single-rod/Basic |
| Available Bores(mm) |
 32, 40, 50, 63, 80, 100, 125 |
| Mounting Style |
SD/LA/EA/EB/FA/FB/CA/CB/TA/TC |
| Norminal Pressure |
10MPa |
| Max. Allowable Pressure |
Other than TC:10MPa TC style:32∼63 10MPa 80∼125 7MPa |
| Proof Test Pressure |
15MPa |
| Min. Working Pressure |
Rod side: less than 0.45MPa Head side: less than 0.3MPa |
| Operating Speed Range |
32∼63:8∼400mm/s 80∼125:8∼300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do no use when frozen) |
| Cushion Mechanism |
Metal fitting system |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working
oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32·40:∼1200mm 50·63:∼1400mm
80:∼1600mm 100:∼1800mm 125:∼2000mm |
| Stroke Tolerance |
 |
| Accessories |
Rod End Attachment |
Rod End Eye(T type)/Rod End Clevis(Y type) |
| Boots |
Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex |
| Others |
Lock Nut |
Note)
|
The max. allowable pressures for the TC type are applicable when load is applied to only one side with the TC positioned in the center. |
|
Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. |
|
Rod series B and port Rc conform to JIS B8367 (not included in ISO 10762 standards for body). |
|
As for the EA mounting style of 63mm bore, only the length of centering guide (dimension F) is differs from that of the standard type. |
|
Mounting dimensions of the CA mounting style cylinder differ from those of the standard type. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
Petroleum-based
Fluid |
Water-Glycol
Fluid |
Phosphate-Ester
Fluid |
Water in Oil
Fluid |
Oil in Water
Fluid |
| 1:Nitrile rubber |
 |
|
 |
|
|
| 3:Fluoric rubber |
 |
|
|
 |
|
| 6:HNBR |
|
|
|
|
|
| 8:Combined seal |
|
|
|
|
|
Note1)
|
The -marked items are applocable,while the -marked items are inapplicabe.
For the -marked items, contact us before usage. |
Note2)
|
The -marked items are the recommended packing materials in case of giving the first priority to abrasion resistance. |
|
|
|
|
