 |
 |
Product Lineup |
  Click the icon as follows, then the list price and leadtime will be
work out. |
| Rod Diameterr |
Bore(mm) |
| 32 |
40 |
50 |
63 |
80 |
100 |
125 |
| B |
|
|
|
|
|
- |
- |
|
|
Specifications |
| Action Style |
Cutting oil proof type/Double-acting Single-rod/Switch Set |
| Available Bores(mm) |
 32, 40, 50, 63, 80 |
| Mounting Type |
SD/LA/EA/EB/FA/FB/CA/CB/TA/TC |
| Rod Dia. Type |
B |
| Norminal Pressure |
10MPa |
| Max. Working Pressure |
Without TC : 10MPa TC : 32 to 63 10MPa 80 to 125 7MPa |
| Proof Test Pressure |
15MPa |
| Min. Working Pressure |
Rod Side : less than 0.45MPa Head Side : less than 0.3MPa |
| Operating Speed Range |
32 to 63:8 to 400mm/s 80 to 125:8 to 300mm/s |
| Operating Temperature |
-10 to +80 ºC(But do not use when frozen) |
| Cushion Mechanism |
Metal fitting type |
| Working Fluid |
Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
| Thread Tolerance |
JIS 6g/6H |
| Standard Stroke |
32/40: to 1200mm 50/63: to 1400mm
80: to 1600mm 100: to 1800mm 125: to 2000mm |
| Stroke Tolerance |
 |
| Accessorie |
Rod End Attachment |
Rod End Eye(T type)/Rod End Clevis(Y type) |
| Boots |
Standard:Nylon tarpaulin Semi-standard:Chloroprene/Conex |
Note)
|
The max. allowable pressures for the TC type are applicable when load is applied
to only one side with the TC positioned in the center. |
|
Hydraulic pressure that is generated in cylinder due to the inertia of
load shall be set at less than the maximum allowable pressure. |
|
Rod series B and port Rc conform to JIS B8367 (not included in ISO 10762
standards for body). |
|
As for the EA mounting style cylinder with 63mm bore, only the length of centering guide (dimension F) differs from that of
the standard type. |
|
Mounting dimensions of the CA mounting style cylinder differ from those of the
standard type. |
|
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
Allowable Fluid, Seal Material |
| Seal Material |
Allowable Fluid |
Aqueous Cutting Oil |
| Petroleum-based Fluid |
Water-Glycol Fluid |
| 6: HNBR |
 |
 |
|
| Note) |
| The -marked items are applicable, while -marked items are
inapplicable. |
|
|
|
|
|
