 |
|
|
 |
|
Low-speed Body-screwed type shock absorber with small, light, analog adjustable
type. |
 |
Ideal for the shock absorption at low speed with the energy adjustable
type. |
|
The mounting thread is provided on the outer surface of cylinder body, thus
allowing the easy installation just like bolts. |
|
The shock absorption is very soft. |
|
|
 |
Specifications |
Click the Model Numbers as follows, to check the details.
|
|
| Model Numbers |
L-A2M27N025SD
(Standard) |
L-A2M27S025SD-C
(With Cap) |
| Max. energy absorption |
15.7 to 79.4J |
| Stroke |
25mm |
| Equivalent Weight Range |
650kg |
| Note1)Max. Energy Capacity Per Min. |
539J/min |
| Impact Speed Range |
less than 1m/s |
| Note3)Max. Resisting Force Value |
6860N |
| Note2)Rod Return Force |
27.3N |
| Note2)Rod Return Time |
0.5s |
| Max. Operating Cycle |
60 cycle/min |
| Operating Temperature Range |
-5 to +70 Celsius Degree(But do not use when frozen) |
| Weight |
Body |
411g |
470g |
| FA nut |
160g |
| FA nut |
FA-A2M27 |
| Auxiliary stopper nut |
SN-A2M27 |
SN-A2M27-C |
| Adapter for declination |
OP-010FB |
- |
| Note1) |
Max. energy capacity per minute in the table is shown at the ambient temperature
of 26.7 Celsius degree. Max. energy capacity per minute at the ambient
temperature T (Celsius degree) mentioned as E2(J/min) is calculated
according to following formula. |
|
 |
| Note2) |
It indicates the maximum value whren stroke 16mm is pushed. |
| Note3) |
Max. resisting force value is the value in case that appropriate adjustment has
been conducted. |
|
|
|
|
|
