Mini-Softer Self-Compensation (Lightweight Shock Absorber) F5M20_20 Series

Instruction Manual

	Small, lightweight shock absorber of screw type with adjsutment unnecessary.
	With the adjustment not needed, impact objects are softly stopped according to the fluctuation of load.
	With the mounting thread provided on the outer surface of body, the handling is easy as if bolt is mounted.
	It is ideal for the shock absorption with air cylinder.
	With the use of urethane cap, the noise in impact can be reduced.
	As the structure is simple and solid, MINI-SOFTER body can be used as stopper.
	In case of similar impact loads, the parallel use of over 2 MINI-SOFTERS is available.

Dimensional Drawings

Specifications

Click the Model Numbers as follows, to check the details.

Model Numbers		F5M20N020SD-1 (Standard)	F5M20N020SD-3 (With Cap)
Max. energy absorption		29.4J
Stroke		20mm
Note1)Max. Energy Capacity Per Min.		412J/min
Impact Speed Range		less than 1m/s	less than 3m/s
Max. Resisting Force Value		3750N
Note2)Rod Return Force		16.7 to 37.4N
Note2)Rod Return Time		0.05s
Max. Operating Cycle		60 cycle/min
Operating Temperature Range		-5 to +70 Celsius Degree(But do not use when frozen)
Weight	Body	0.20kg(With 2 hexagonal nuts)
	FA nut	0.11kg
FA nut		FA-A2M20

Note1)	Max. energy capacity per minute in the table is shown at the ambient temperature of 26.7 Celsius degree. Max. energy capacity per minute at the ambient temperature T (Celsius degree) mentioned as E₂(J/min) is calculated according to following formula.

Note2)	It indicates the max. value when stroke 20mm is pushed.

Copyright(c)2004 TAIYO,LTD. All rights reserved.