 |
Multi-aperture orifice |
|
 |
|
Shock absorber with impact energy of less than 353J. Even for the diversification
of impact load energy, the simple adjustment is available only by operating
the adjusting dial. |
|
As it is the variable orifice type, the equivalent load is in the range set for
each type. And if it is in the max. energy range, the non-phase adjustment is
available. |
|
The economical shock absorber can be selected with the smaller resisting force
than the single aperture orifice by adjusting correctly. |
|
To cope with the fluctuation of actual equivalent load, it is designed for the
wide range of adjustment. |
|
 |
 |
Specifications |
Click the Model Numbers as follows, to check the details.
|
|
| Model Numbers |
ASE-06-10
ASF-06-10 |
ASU-06-10 |
ASE-06-24
ASF-06-24 |
ASU-06-24 |
| Mounting Style |
E,F |
U |
E,F |
U |
| Max. energy absorption |
141J |
97.1J |
353J |
245J |
| Stroke |
25.4mm |
63.5mm |
| Equivalent Weight Range |
Note1)11 to 11000kg |
| Max. Energy Capacity Per Min. |
735J/min |
1330J/min |
| Impact Speed Range |
5m/s |
| Note3)Max. Resisting Force Value |
11300N |
7790N |
11300N |
7870N |
| Note2)Rod Return Force |
73.5N |
79.4N |
| Note2)Rod Return Time |
0.1s |
0.3s |
| Max. Operating Cycle |
30 cycle/min |
| Operating Temperature Range |
-5 to +50 Celsius Degree(But do not use when frozen) |
| Weight |
1.19kg |
1.26kg |
1.62kg |
1.68kg |
| Accessories |
Auxiliary oil tank |
| Note1) |
Max. energy capacity per minute in the table is shown at the ambient temperature
of 26.7 Celsius degree. Max. energy capacity per minute at the ambient
temperature T (Celsius degree) mentioned as E2(J/min) is calculated
according to following formula. |
|
 |
| Note2) |
It indicates the max. value when full stroke is pushed. |
| Note3) |
Max. resisting force value is the value in case that appropriate adjustment has
been conducted. |
|
|
|
Accessories |
Click the Model Numbers as follows, to check the details.
|
| Product Name |
Model Numbers |
Model Numbers |
| Auxiliary oil tank |
OT-02H |
OT-02V |
| The regular shock absorption is not available if working fluids
decrease or the air is mixed. For the appropriate supply of working fluids, it
is necessary to mount the auxiliary oil tank. The tank shall be used in case
that it is used over once per minute. |
|
Change Parts |
Click the Model Numbers as follows, to check the details.
|
|
|
|
|
