 |
|
|
 |
|
Small, lightweight, bodyscrewed shock absorber of analog adjustable type. |
|
The energy adjustable type assures the adjustment from any side of front and
rear.(Except for FB type, CB type, with switch.) |
|
The mounting thread is provided on the outer surface of cylinder body, thus
allowing the easy installation just like bolts. |
|
The shock absorption is very soft. |
|
There are plentiful types, the model with cap that prevents the impact noise
and the switch-set model that takes the signal at stroke end. |
|
|
 |
Specifications |
Click the Model Numbers as follows, to check the details.
|
|
| Model Numbers |
A2M27N025SD
(Standard) |
A2M27S025SD-C
(With Cap) |
A2M27S025CB
(Clevis) |
| Mounting Style |
LA,FA,FB |
Only for CB |
| With Switch |
With Switch |
Without Switch |
| Max. energy absorption |
79.4J |
| Stroke |
25mm |
| Equivalent Weight Range |
5 to 500kg |
| Note1)Max. Energy Capacity Per Min. |
539J/min |
| Impact Speed Range |
0.15 to 3m/s |
| Note3)Max. Resisting Force Value |
7200N |
| Note2)Rod Return Force |
44.1N |
| Rod Return Time |
0.3s |
| Max. Operating Cycle |
60 cycle/min |
| Operating Temperature Range |
-5 to +70ºC(With Switch : -5 to +50 Celsius Degree(But do not use when frozen) |
| Weight |
Body |
0.4kg |
0.6kg |
| Mounting Style |
LA nut : 0.27kg FA nut : 0.16kg FB nut : 0.26kg |
- |
| Note1) |
Max. energy capacity per minute in the table is shown at the ambient temperature
of 26.7 Celsius degree. Max. energy capacity per minute at the ambient
temperature T (Celsius degree) mentioned as E2(J/min) is calculated
according to following formula. |
|
 |
| Note2) |
It indicates the maximum value whren stroke 25mm is pushed. |
| Note3) |
Max. resisting force value is the value in case that appropriate adjustment has
been conducted. |
|
|
|
|
|
