 |
|
|
 |
|
Small, lightweight, bodyscrewed shock absorber of analog adjustable type. |
|
The energy adjustable type assures the adjustment from any side of front and rear.(Except for FB type, CB type, with switch.) |
|
The mounting thread is provided on the outer surface of cylinder body,
thus allowing the easy installation just like bolts. |
|
The shock absorption is very soft. |
|
There are plentiful types...the model with cap that prevents the impact
noise and the switch-set model that takes the signal at stroke end. |
|
|
 |
Specifications |
Click the Model Numbers as follows, to check the details. |
|
| Model Numbers |
A2M20N016SD
(Standard) |
A2M20N016SD-C
(With Cap) |
A2M20N016CB
(Clevis) |
| Mounting Style |
LA,FA,FB |
Only for CB |
| With Switch |
With Switch |
Without Switch |
| Max. energy absorption |
25.5J |
| Stroke |
16mm |
| Equivalent Weight Range |
2 to 200kg |
| Note1)Max. Energy Capacity Per Min. |
343J/min |
| Impact Speed Range |
0.15 to 3m/s |
| Note3)Max. Resisting Force Value |
3610N |
| Note2)Rod Return Force |
35.3N |
| Note2)Rod Return Time |
0.2s |
| Max. Operating Cycle |
60 cycle/min |
| Operating Temperature Range |
-5 to +70 Celsius Degree/With Switch : -5 to +50 Celsius Degree(But do
not use when frozen) |
| Weight |
Body |
0.19kg |
0.26kg |
| Mounting Style |
LA,FA nut : 0.11kg FB nut : 0.17kg |
- |
| Note1) |
Max. energy capacity per minute in the table is shown at the ambient temperature
of 26.7 Celsius degree. Max. energy capacity per minute at the ambient
temperature T (Celsius degree) mentioned as E2(J/min) is calculated according to following formula. |
|
 |
| Note2) |
It indicates the maximum value whren stroke 6mm is pushed. |
| Note3) |
Max. resisting force value is the value in case that appropriate adjustment
has been conducted. |
|
|
|
|
|
