 |
14MPa Tube-Flange Type Heavy Duty Hydraulic Cylinder |
|
 |
 |
Available bore size  63∼160 and stroke 200∼3000mm. |
|
Equipped with high-performance cushioning as standard. |
|
The adoption of newly designed cushion valve allows easy cushion adjustment. |
|
The anti-coming-off structure and looseness-preventive lock nut have been adopted as safety measures for the cushion valve. |
|
Adopting O-ring seal for cover and screw-in type tube flange. |
|
The mountings which used are more stiffness than 140H-8 series. |
|
 |
 |
Product Lineup |
|
| Structure |
Double-acting Single-rod |
| Available Bores(mm) |
63·80·100·125·140·160 |
| Mounting Style |
LA·FA·FB·CA·CB·TA·TC |
| Nominal Pressure |
14MPa |
Max. Allowable
Pressure |
Rod Side |
A Rod:18MPa B Rod:18MPa |
| Head Side |
A Rod:18MPa B Rod:18MPa |
| Proof Test Pressure |
21MPa |
Min. Working
Pressure |
Rod Side |
A Rod:0.6MPa and below B Rod:0.45MPa and below |
| Head Side |
0.3MPa and below |
| Operating Speed Range |
20∼200mm/s |
| Temperature Range |
-10∼+80ºC (But do not use when frozen) |
| Structure of Cushioning |
Metal fitting type |
| Adaptable Working Oil |
Petroleum-basedFluid
(For other working oil, refer to the table of working oil adaptability.) |
| Tolerance of Thread |
JIS 6g/6H(equivalent to JIS 2 class) |
| Stroke Tolerance |
 |
| Accessories |
Rod Boot |
Standard:Nylon tarpaulin / Semi-standard:Chloroprene·Conex |
| Rod End Attachments |
Rod End Spherical Eye(S type)·Rod End Clevis(Y type) |
| Others |
Lock Nut |
Note1)
|
Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. |
Note2)
|
If using lock nut at the end of piston rod, please order to lengthen the thread length of piston rod end (A dimension). |
| Note3) |
Conex of boots is the registered trade mark of Teijin,Ltd. |
|
|
Allowable Fluid, Seal Material |
|
| Packing Material |
Working Fluid |
Petroleum-based
Fluid |
Water-Glycol
Fluid |
Phosphate-Ester
Fluid |
Water in Oil
Fluid |
Oil in Water
Fluid |
| 1:Nitrile Rubber |
 |
|
 |
|
|
| 2:Urethane rubber |
 |
|
|
 |
|
| 3:Fluoric rubber |
|
|
|
|
|
| 6:HNBR |
|
|
|
|
|
The -marked items are applicable,while the -marked items are inapplicabe. In the case of -marked, please contact to TAIYO service network.
-marked items are the recommended packing materials in case of giving the first priority to abrasion resistance. |
|
|
|
